Mitigating Effects of Interference in On-Chip Antenna Measurements

Back to resources

Mitigating_Effects_Interference_On-Chip_Antenna_Measurements.png

Coupling a Chip Antenna to an Antenna Measurement System is typically achieved using a coplanar micro-probe.

This micro-probe is attached to a probe positioner that is used to maneuver the micro-probe into position and land it on the chip. Through this process, the chip antenna is supported by a dielectric chuck. Intentional and unintentional radiation from the chip antenna will interact with the micro-probe and dielectric chuck.

Download the PDF Document

Chat with our virtual agent