Radar Cross Section (RCS) Solutions

Radar Cross Section Measurement Solutions

400 MHz - 18000 MHz

MVG provides complete RCS Measurement Solutions, from data acquisition to post-processing, in test ranges such as:

Indoor: Tapered Chamber, Plane Wave Generator (PWG), Compact Range (CR), and Planar/Cylindrical Near
Outdoor: Far Field (FF), Planar and Cylidrical Near Field (NF)

Our fully integrated, turnkey systems are designed and built in-house to ensure high accuracy, system-level performance, and seamless integration with evolving testing needs.

Ver las referencias

Radar Cross Section Measurement Solutions

Referencias

Far-field

Outdoor Ranges

Specifications

Frequency

0.4 - 18 GHz (typically)

Pylon

Changeable pylon tips for different measurement targets
Pylon can be concealed within the concrete reaching into ground level for ease of target mounting

Adjustable Height Tx/Rx Station

Different antenna height configurations, depending on target distance and frequency allows better ground bounce control

Clutter Control

Different possible radar fence configurations for reduce ground bounce effect

Control Room

Can be facilitated as fixed ground station or mobile down range vehicle

Planar and Cylindrical Near-Field

Outdoor Ranges

Specifications

Frequency

0.4 - 18 GHz (typically)

Target

Full-scale target measurement at short distances
Applicable to both model and real targets – as - is / before take-off
Fast check of platform RCS configuration
Maintenance purposes during platform life cycle

Measurement Configuration

SAR vertical scan (2D) in front of the target by means of Y tower scanner
ISAR complete 3D scan by means of Y tower scanner and Pylon (AZ/EL)

Tapered Chamber

Indoor Ranges

Specifications

Frequency

0.1 - 2 GHz (typically)

Reduced reflectivity

Tapered walls design minimize internal reflections by directing stray signals towards chamber back wall

Clutter control

Fewer multiple reflections and reduced background noise, improving signal-to-noise ratio

Integrated tapered feed

For high cross pol and planar wave front control performances

Compact Range

Indoor Ranges

Specifications

Frequency

0.7 - 110 GHz (typically)

Capabilities

Automatic feed selection for continuous full frequency coverage
High system dynamic range and high sensitivity
High cross polar performances

Chamber clutter

Well below RF system noise

Flexible and modular target positioning

Pylon, Styrofoam, etc.

Reflector

High surface accuracy to support mm-wave measurements

Plane Wave Generator

Indoor Ranges

Specifications

Frequency

0.1 - 1.0 GHz | Sub 6 GHz (typically)

Capabilities

Gain
Beamwidth
Sidelobe levels
Radiation pattern in any polarizations (linear or circular) and cross-polarization
Radome measurement
Directivity
2D and 3D radiation patterns
RCS measurement
EIRP and G/T

Planar / Cylindrical Near-Field

Indoor Ranges

Specifications

Frequency

1.0 - 40.0 GHz (typically)

Capabilities

NF to FF correction in the ISAR software tool allows focalization of the radar image
Effectively mitigate clutter through advanced data processing techniques and high-resolution capabilities

Compact Test Environment

NF RCS ranges require much less physical space than traditional far-field ranges, making them ideal for indoor labs, production environments, or urban locations

Cost Efficiency

By avoiding long distances needed in far-field setups, NF RCS ranges reduce infrastructure and operational costs

Enhanced Measurement Flexibility

The test setup allows for multi-angle and multi-polarization scanning, and can handle complex test scenarios

SAR and ISAR Imaging Capabilities

NF RCS systems can generate SAR (Synthetic Aperture Radar) and ISAR (Inverse Synthetic Aperture Radar) images, providing high-resolution radar imagery of static or moving targets
- SAR allows imaging by virtually moving the radar around a stationary target
- ISAR captures images of a moving target using its motion to synthesize the aperture.These capabilities are invaluable for feature identification, scattering analysis, and target classification

Dual Gantry Bi-Static

Indoor Ranges

Specifications

Frequency

1.0 - 40.0 GHz (typically)

Capabilities

Equal radius gantry arms
Incorporates an anti-collision safety features
Antenna measurement
Monostatic / bi-static SER and diffracted filed measurements, for material samples as a function of aspect angle and frequency, and diagnostic radar imaging for energy absorption uniformity verification
Reflection coefficient of planar RAM/material samples as a function of incidence angle and frequency band in bi-static configuration or mono-static configuration at normal incidence
Insertion loss (transparency) of material/FSS planar samples as a function of incidence angle and frequency, with rotation of the sample