Mitigating Effects of Interference in On-Chip Antenna Measurements

리소스로 돌아가기

Mitigating_Effects_Interference_On-Chip_Antenna_Measurements.png

Coupling a Chip Antenna to an Antenna Measurement System is typically achieved using a coplanar micro-probe.

This micro-probe is attached to a probe positioner that is used to maneuver the micro-probe into position and land it on the chip. Through this process, the chip antenna is supported by a dielectric chuck. Intentional and unintentional radiation from the chip antenna will interact with the micro-probe and dielectric chuck.

PDF 문서 다운로드

가상 상담원과 채팅하기