1. ホームページ
  2. 製品&サービス
  3. RCS測定
  4. Radar Cross Section (RCS) Solutions
  5. レーダー断面積測定ソリューション

Radar Cross Section (RCS) Solutions

レーダー断面積測定ソリューション

400 MHz - 18000 MHz

MVGは、以下のようなテストレンジにおいて、データ取得から後処理まで、完全なRCS測定ソリューションを提供します：

  • インドア屋内：テーパードチャンバー、平面波発生器（PWG）、コンパクトレンジ（CR）、平面/円筒近傍
  • 屋外：遠距離場（FF）、平面・円筒近接場（NF）

 

当社の完全統合型ターンキーシステムは、高精度、システムレベルの性能、進化する試験ニーズへのシームレスな統合を保証するために、社内で設計・製造されています。

参考文献を見る
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション
レーダー断面積測定ソリューション

参考文献

Far-field

Far-field

Outdoor Ranges

Specifications

Frequency 

  • 0.4 - 18 GHz (typically)

 

Pylon

  • Changeable pylon tips for different measurement targets
  • Pylon can be concealed within the concrete reaching into ground level for ease of target mounting

 

Adjustable Height Tx/Rx Station

  • Different antenna height configurations, depending on target distance and frequency allows better ground bounce control

 

Clutter Control

  • Different possible radar fence configurations for reduce ground bounce effect

 

Control Room

  • Can be facilitated as fixed ground station or mobile down range vehicle

Planar and Cylindrical Near-Field

Planar and Cylindrical Near-Field

Outdoor Ranges

Specifications

Frequency 

  • 0.4 - 18 GHz (typically)

 

Target

  • Full-scale target measurement at short distances
  • Applicable to both model and real targets – as - is / before take-off
  • Fast check of platform RCS configuration
  • Maintenance purposes during platform life cycle

 

Measurement Configuration

  • SAR vertical scan (2D) in front of the target by means of Y tower scanner
  • ISAR complete 3D scan by means of Y tower scanner and Pylon (AZ/EL)

Tapered Chamber

Tapered Chamber

Indoor Ranges

Specifications

Frequency

  • 0.1 - 2 GHz (typically)

 

Reduced reflectivity

  • Tapered walls design minimize internal reflections by directing stray signals towards chamber back wall

 

Clutter control

  • Fewer multiple reflections and reduced background noise, improving signal-to-noise ratio

 

Integrated tapered feed

  • For high cross pol and planar wave front control performances

Compact Range

Compact Range

Indoor Ranges

Specifications

Frequency

  • 0.7 - 110 GHz (typically)

 

Capabilities

  • Automatic feed selection for continuous full frequency coverage
  • High system dynamic range and high sensitivity
  • High cross polar performances

 

Chamber clutter

  • Well below RF system noise

 

Flexible and modular target positioning

  • Pylon, Styrofoam, etc.

 

Reflector

  • High surface accuracy to support mm-wave measurements

Plane Wave Generator

Plane Wave Generator

Indoor Ranges

Specifications

Frequency

  • 0.1 - 1.0 GHz | Sub 6 GHz (typically)

 

Capabilities

  • Gain
  • Beamwidth
  • Sidelobe levels
  • Radiation pattern in any polarizations (linear or circular) and cross-polarization
  • Radome measurement
  • Directivity
  • 2D and 3D radiation patterns
  • RCS measurement
  • EIRP and G/T

Planar / Cylindrical Near-Field

Planar / Cylindrical Near-Field

Indoor Ranges

Specifications

Frequency

  • 1.0 - 40.0 GHz (typically)

 

Capabilities

  • NF to FF correction in the ISAR software tool allows focalization of the radar image
  • Effectively mitigate clutter through advanced data processing techniques and high-resolution capabilities

 

Compact Test Environment

  • NF RCS ranges require much less physical space than traditional far-field ranges, making them ideal for indoor labs, production environments, or urban locations

 

Cost Efficiency

  • By avoiding long distances needed in far-field setups, NF RCS ranges reduce infrastructure and operational costs

 

Enhanced Measurement Flexibility

  • The test setup allows for multi-angle and multi-polarization scanning, and can handle complex test scenarios

 

SAR and ISAR Imaging Capabilities

  • NF RCS systems can generate SAR (Synthetic Aperture Radar) and ISAR (Inverse Synthetic Aperture Radar) images, providing high-resolution radar imagery of static or moving targets
    - SAR allows imaging by virtually moving the radar around a stationary target
    - ISAR captures images of a moving target using its motion to synthesize the aperture.These capabilities are invaluable for feature identification, scattering analysis, and target classification

 

Dual Gantry Bi-Static

Dual Gantry Bi-Static

Indoor Ranges

Specifications

Frequency

  • 1.0 - 40.0 GHz (typically)

 

Capabilities

  • Equal radius gantry arms
  • Incorporates an anti-collision safety features
  • Antenna measurement
  • Monostatic / bi-static SER and diffracted filed measurements, for material samples as a function of aspect angle and frequency, and diagnostic radar imaging for energy absorption uniformity verification
  • Reflection coefficient of planar RAM/material samples as a function of incidence angle and frequency band in bi-static configuration or mono-static configuration at normal incidence
  • Insertion loss (transparency) of material/FSS planar samples as a function of incidence angle and frequency, with rotation of the sample
Discutez avec notre agent virtuel