WEBINAR: The Link
Online - Online
Online - Online
A Free Joint Presentation by MVG and ALTAIR
Live, Wednesday, April 14, 2021 | 12 – 4 pm EST
Antenna testing using NF and FF techniques – J. Estrada/ L. Foged, MVG
Antenna modelling and simulation techniques - C.J. Reddy, Altair
Synergistic uses of antenna measurements and simulations in antenna placement scenarios - L. Scialacqua, MVG
Panel discussions and conclusions
Computational Electromagnetics (CEM) software tools have proven to be invaluable resources for the design, optimization, and integration of a wide variety of antennas and RF sensors on large and complex platforms. Altair FekoTM software is one of these very useful tools for predicting the performance of antennas mounted on electrically large platforms such as large vehicles, air, sea, or spacecraft.
MVG has developed a powerful tool that takes an antenna measurement and provides an accurate near-field representation of any radiating device, in the form of a Huygens box, using equivalent current (EQC) techniques. The resulting near-field data of this technique is then transformed into a standard file format that can be used in Altair Feko software for installed antenna performance simulations.
This free webinar will cover an overview of antenna measurement techniques, MVG systems, and Altair Feko. Then the EQC source modeling implemented in MVG INSIGHT software will be presented and applied in Altair FekoTM to demonstrate an efficient analysis of an electrically large platform.